Plinius 9200 Integrated 200watt amplifier $2750
This is a fantastic, NZ hand-made solid state amp with a whopping 200 watts of power per side. Amazing, detailed, sharp, but warm sound with one of the best phono stages on the market.
All 5-Star reviews (see 6moon.audio and WhatHiFi).
http://www.6moons.com/audioreviews/plinius2/1.html
New was £3800 GBP ($7000 AUD), this is an incredible amp for the money.
As-new condition, comes with original box, original manual, the famous Plinius "weapon" remote , and even the original white gloves for handling! Please see attached photos
(Only selling as moving back to single-ended-triode configuration (I am a "valve-tragic", and my children are now old enough not to pull on the output valves!))
This is a GREAT amp you won't be disappointed. Specs as below (from manufacturer):
Features and specs (from manufacturer website):
Power: 200 watts per channel into 8 ohms. 280 watts per channel into 4 ohms. Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion
Frequency Response: 20Hz to 20kHz ±0.2dB -3dB at 5Hz and -3dB at 70kHz
Distortion: Typically <0.05% THD at rated power 0.2% THD and IM worst case prior to clipping
Current Output: 40A short duration peak per channel
Fuse protected
Slewing: 50V/µs
Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted
Gain: Line inputs to speaker out: 40dB
Phono Input To Pre-Out: 66dB on high gain, 60dB on low gain
Input Impedance: 47k ohms all inputs
Input Overload: 5V RMS
Rated Pre Out Level: 1.5V RMS into 47k ohm or higher
Pre Out Source Impedance: Typically 1.5k ohms
Pre Out Minimum Recommended Load: 47k ohms
Tape Output Level: 190mV at 200 ohms Tape loop muting at 5V RMS input
Power/Current Consumption: 600VA 0.4A (92W) Class AB Idle
Dimensions: Height: 120mm (4.75")
Width: 450mm (17.75")
Depth: 400mm (15.75")
Weight: 14kg (30lbs)
This is a fantastic, NZ hand-made solid state amp with a whopping 200 watts of power per side. Amazing, detailed, sharp, but warm sound with one of the best phono stages on the market.
All 5-Star reviews (see 6moon.audio and WhatHiFi).
http://www.6moons.com/audioreviews/plinius2/1.html
New was £3800 GBP ($7000 AUD), this is an incredible amp for the money.
As-new condition, comes with original box, original manual, the famous Plinius "weapon" remote , and even the original white gloves for handling! Please see attached photos
(Only selling as moving back to single-ended-triode configuration (I am a "valve-tragic", and my children are now old enough not to pull on the output valves!))
This is a GREAT amp you won't be disappointed. Specs as below (from manufacturer):
Features and specs (from manufacturer website):
Power: 200 watts per channel into 8 ohms. 280 watts per channel into 4 ohms. Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion
Frequency Response: 20Hz to 20kHz ±0.2dB -3dB at 5Hz and -3dB at 70kHz
Distortion: Typically <0.05% THD at rated power 0.2% THD and IM worst case prior to clipping
Current Output: 40A short duration peak per channel
Fuse protected
Slewing: 50V/µs
Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted
Gain: Line inputs to speaker out: 40dB
Phono Input To Pre-Out: 66dB on high gain, 60dB on low gain
Input Impedance: 47k ohms all inputs
Input Overload: 5V RMS
Rated Pre Out Level: 1.5V RMS into 47k ohm or higher
Pre Out Source Impedance: Typically 1.5k ohms
Pre Out Minimum Recommended Load: 47k ohms
Tape Output Level: 190mV at 200 ohms Tape loop muting at 5V RMS input
Power/Current Consumption: 600VA 0.4A (92W) Class AB Idle
Dimensions: Height: 120mm (4.75")
Width: 450mm (17.75")
Depth: 400mm (15.75")
Weight: 14kg (30lbs)
