Yamaha A-S2000 high end Integrated Amplifier (Phono with MM/MC switch) RRP: $3,299.00
This is one of the best amplifier in the market IMO. Regrettable sale to fund an overseas trip.
Price: $2,450 + Shipping
Location: Brisbane
Mint condition, very rare and hard to find one nowadays, superb sound quality, no scratch on the surface, with remote and original box.
Happy to post at buyer's expense.
----------------------------------------
Fine Music in the Yamaha Tradition
Yamaha introduces a new, superior approach to analogue amplifier design. It's full floating and balanced circuit design ensure, for the first time, that the full potential of analogue amplification may be realised.
I/O (input to output) Direct Symmetrical Design
Full-stage balanced signal transmission
Floating balanced power amp
Fully balanced control amp
Three parallel balanced volume and tone controls
Four large capacity power supplies for power amp
Shunt type local regulators for preamplifier
Discrete headphone amp for low-impedance drive
Discrete phono amp with high-precision head amp and equaliser amp
Specially designed feet
Specifications:
Maximum Power (4 ohms, 1 kHz) 190 W + 190 W
Minimum RMS Output Power (4 ohms, 20 Hz-20 kHz) 150 W + 150 W
High Dynamic Power/Channel (8/6/4/2 ohms) 105/135/190/220 W
Damping Factor 160
Maximum Input Signal (CD etc, 1kHz, 0.5%THD) 2.8V
Frequency Response 5 Hz-100 kHz (+0 dB/-3 dB)
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) 0.015%
Signal-to-Noise Ratio (CD) 98 dB (S: 150 mV)
Input Sensitivity (CD) 150mV/47k ohms
Dimensions (W x H x D) 435 x 137 x 465 mm; 17-1/8” x 5-3/8” x 18-5/16”
Weight 22.7 kg; 50 lbs.
This is one of the best amplifier in the market IMO. Regrettable sale to fund an overseas trip.
Price: $2,450 + Shipping
Location: Brisbane
Mint condition, very rare and hard to find one nowadays, superb sound quality, no scratch on the surface, with remote and original box.
Happy to post at buyer's expense.
----------------------------------------
Fine Music in the Yamaha Tradition
Yamaha introduces a new, superior approach to analogue amplifier design. It's full floating and balanced circuit design ensure, for the first time, that the full potential of analogue amplification may be realised.
I/O (input to output) Direct Symmetrical Design
Full-stage balanced signal transmission
Floating balanced power amp
Fully balanced control amp
Three parallel balanced volume and tone controls
Four large capacity power supplies for power amp
Shunt type local regulators for preamplifier
Discrete headphone amp for low-impedance drive
Discrete phono amp with high-precision head amp and equaliser amp
Specially designed feet
Specifications:
Maximum Power (4 ohms, 1 kHz) 190 W + 190 W
Minimum RMS Output Power (4 ohms, 20 Hz-20 kHz) 150 W + 150 W
High Dynamic Power/Channel (8/6/4/2 ohms) 105/135/190/220 W
Damping Factor 160
Maximum Input Signal (CD etc, 1kHz, 0.5%THD) 2.8V
Frequency Response 5 Hz-100 kHz (+0 dB/-3 dB)
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) 0.015%
Signal-to-Noise Ratio (CD) 98 dB (S: 150 mV)
Input Sensitivity (CD) 150mV/47k ohms
Dimensions (W x H x D) 435 x 137 x 465 mm; 17-1/8” x 5-3/8” x 18-5/16”
Weight 22.7 kg; 50 lbs.
