These are for sale now
individually as priced or as a pair for $2200 plus any postage costs if required
Item: Schiit Audio Mjolnir 2
Location: Melbourne Wollert
Price: $1300 plus shipping if required
Item Condition: Virtually brand new (only 2 weeks old today)
Reason for selling: moving up the food chain
Payment Method: cash on pickup or direct deposit
Extra Info:
This was purchased from addicted to audio 2 weeks ago today. It presents like new and comes with both 6BZ7 and LISST tubes
it's a hybrid head amp, both SS with the use of LISST solid state tubes or tube using 6BZ7.
the 6BZ7.
You can also use anything from 6DJ8, 6922, ECC88, and 2492 families
full 5 year warranty and made in the USA
have all original packaging and manual
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB
Maximum Power, 32 ohms: 8.0W RMS per channel
Maximum Power, 50 ohms: 5.0W RMS per channel
Maximum Power, 300 ohms: 850mW RMS per channel
Maximum Power, 600 ohms: 425mW RMS per channel
THD: <0.005%, 20Hz-20KHz, at 1V RMS
IMD: <0.006%, CCIF?, at 1V RMS
SNR: >104db, unweighted, referenced to 1V RMS, in low gain mode
Crosstalk: >-75dB, 20 Hz-20KHz
Output Impedance: 1 ohm ?(high gain), 0.3 ohms (low gain)
Gain: 8 (18dB) or 1(0db), via front-panel switch
Topology: Tube voltage gain or solid-state tube voltage gain, cross-shunt push-pull Crossfet output stage, noninverting, single voltage gain stage
Power Supply: specific Circlotron 4-secondary output stage transformer with over 65,000uF filter capacitance, plus dedicated transformer for high-voltage discrete-regulated front end stage with 200V rails and over 4,000uf of filter capacitance
Inputs: one pair balanced XLR, one pair single-ended RCAs, switchable via front panel switch
Outputs: one 4-pin balanced female XLR, one ¼” TRS phono, one pair 3-pin male XLR preamp, one pair single-ended RCA
Power Consumption: 45W Size: 16 x 8.75 x 2.25” Weight: 13 lbs
Item: Schiit Audio Gungnir delta sigma dac
Location: Melbourne Wollert
Price: $1150 plus shipping if required
Item Condition: Virtually brand new (only 2 weeks old today)
Reason for selling: Moving up the food chain
Payment Method: cash on pick up or direct deposit
Extra Info:
Purchased this from addicted to audio 2 weeks ago today. It presents like new with very little use
full 5 year warranty and made in the USA
have all original packaging and manual
Gungnir
D/A Conversion IC: AKM AK4399 x 2 (4 total channels, hardware balanced configuration)
Analog Stages: All fully discrete, JFET-input topology, DC coupled, summed for single-ended output
Frequency Response, Analog Stage: 20Hz-20Khz, +/-0.1dB, 1Hz-100KHz, -1dB
Maximum Output: 4.0V RMS (balanced), 2.0V RMS (single-ended)
THD: Less than 0.002%, 20Hz-20KHz, at full output
IMD: <0.002%, CCIR
SNR: > 112dB, referenced to 2V RMS
All Gungnirs
Inputs: Coaxial RCA SPDIF, BNC SPDIF, Optical SPDIF, USB
Input Capability: up to 24/192 for all inputs
Input Receiver, SPDIF: AKM 4313
Input Receiver, USB: C-Media CM6631A
Output: One pair XLR balanced and two pairs RCA single-ended
Output Impedance: 75 ohms
Clock Management: Bitperfect clock management at all native sample rates via Adapticlock analysis and VCXO/VCO regeneration, plus asynchronous USB Gen 2 module
Power supply: two transformers (one for digital supplies, one for analog supplies) with 8 stages of regulation, including separate local supplies for critical digital and analog sections.
Upgradability: Separate, modular USB Input Card and DAC/Analog Cards are snap-in replaceable.
Power Consumption: 20W
Size: 16 x 8.75” x 2.25”
Weight: 11 lbs
Pictures:
